Base ptex materials
Showing 25–30 of 30 resultsSorted by popularity
-
IS 7200 1.2/330mm Sintered base BEIGE
€16.25 "incl. VAT" Add to cartIS 7200 1.2/330mm Sintered base BEIGE
Sintered base / ptex UHMW PW for skis and snowboard.
Please flame this base before use, or do a adhesion test first, as it might have weakened over time.
7200 2G2GV W 812 1,2/330 BEIGE
Color P 7540 C
Tough sintered base for ski and snowboard. IS 7200.
It is 1.2mm thick, this should fit with 1.2mm edges with no problem.
1m price, for orders of more then 1m, a single piece is supplied
Se below for more tips and info!
€16.25 "incl. VAT" -
Sintered Clear ptex base 1.0mm
€15.75 "incl. VAT" Add to cartSintered Clear ptex base 1.0mm
Can be used with 0.9mm step edges!
Tough sintered Clear base, highest quality base for ski and snowboard.
Ptex 2001 Sintered
Suitable for sublimation. Clear.
It is 1.0mm thick, this should fit with 0.9mm edges with no problem.
available width: 310mm.
1m price, for orders of more then 1m, a single piece is supplied
before cutting, lay the base on a flat table for about 48h the base will start to relax. The heating tunnel is just a fast way to bring out the tension.
Storage: Room temperature with low temperature fluctuations. Humidity should not be too high. You can store it on the roll. If you recognize some warping you can also try to wind it in other direction for storage.
€15.75 "incl. VAT" -
IS 4400 1.2/330mm Extruded base Cherry RED
Sale! Original price was: €11.00.€10.00Current price is: €10.00. "incl. VAT" Add to cartIS 4400 1.2/330mm Extruded base Cherry RED
Note: This base is older then 2 years, so you might need to flame it in order for the epoxy to stick to it well (test first). See link below for instructions,
https://www.junksupply.com/flaming-and-sanding-sidewalls-or-the-tip-filler-ptex/
Isosport extruded 4400 quality base for ski and snowbaord.
Cherry Red color, pantone PP 201 C
1.2mm thick
330mm wide
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
sanded and flamed on one both sides! ( to give the best adhesion with epoxy)
Original price was: €11.00.€10.00Current price is: €10.00. "incl. VAT" -
1.2/330mm Sintered base Dark BLUE (IS 7200)
€16.75 "incl. VAT" Add to cart1.2/330mm Sintered base Dark BLUE (IS 7200)
Sintered Base for skis and snowboard UHMW PE base ptex. Dark Blue.
IS 7200 523 BLAU 2G2GV 1,20/330
Color P 281 C
Sanded and flamed on both sides.
1m price, for orders of more then 1m, a single piece is supplied
€16.75 "incl. VAT" -
Extruded base Dark Blue 1.2/330mm (IS 4400)
Sale! Original price was: €12.00.€10.50Current price is: €10.50. "incl. VAT" Add to cartExtruded base Dark Blue 1.2/330mm (IS 4400)
Extruded Base for skis and snowboard HDPE base ptex.
Isosport extruded 4400 base,
IS 4400 Dark Blue 1,20/330
Pantone color P 288 C
quality base for ski and snowboard.
Sanded and flamed both sides.
1.2mm thick
330mm wide
Price is pr.m.
PS: This base is older then 2 years and might need re-flaming on epoxy side.
Original price was: €12.00.€10.50Current price is: €10.50. "incl. VAT" -
Wakeboard / Water-Ski Sintered UHMW-PE Grind base / PTEX – CLEAR
€19.50 "incl. VAT" Add to cartWakeboard / Water-Ski Sintered UHMW-PE Grind base / PTEX – CLEAR
New base available from October 4th.
Sintered Wakeboard and Water-Ski UHME-PE grind base / ptex base. Suitable for powsurf as well.
Tougher, more scratch resistant, more durable hence it thinner and lighter clear base.
Great for gliding on obstacles.
0.6mm thick, 480mm wide, CLEAR!
Matte on outside and sanded and flamed on epoxy side.
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€19.50 "incl. VAT"
Showing 25–30 of 30 resultsSorted by popularity