Topsheet material for skis/snowboard or watersports
Topsheet material for Ski and snowboard or kiteboard and wakeboard DIY. PA nylon, PBT, TPU/ABS topsheet for snow and watersports.
Wakeboard grind base or Powsurf p-tex base.
All you need to know about topsheet and bases is collected here,
https://www.junksupply.com/topsheet-and-base-ptex-for-skis-and-snowboards-and-kiteboards/
Showing all 8 resultsSorted by popularity
-
Wakeboard / Powsurf Grind Base PTEX – CLEAR (IS6000)
€13.50 – €16.00 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pageWakeboard / Powsurf Grind Base PTEX – CLEAR (IS6000)
Wakeboard and powsurf grind base / ptex base and topsheet.
See also our new sintered base: https://www.junksupply.com/product/wakeboard-water-ski-grind-base/
IS 6000 base, also called wakeboard grind base, is a base very close to a sintered bases in quality terms.
The thinner version 0.4mm, can be used as a topsheet also.
Ideal for wakeboard grind base or a lite weight ski or snowboard/splitboard or powsurf. 0.9mm step edges fit for the 0.9mm base.
Base can be sanded and flamed on both sides or in some cases sanded and flamed one side and structured the other side. Se below Detailed description for more info!
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€13.50 – €16.00 "incl. VAT" -
TPU / ABS Topsheet Material – CLEAR (ICP 2115)
€9.00 – €14.00 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pageTPU / ABS Topsheet Material – CLEAR (ICP 2115)
TPU / ABS clear topsheet material for skis, snowboard or kiteboard, wakeboard.
Isosport 2115, 2 layer, Clear TPU/ABS topsheet.
Suitable for some solvent ink printers from inside on ABS layer. Please check first.
Gives a bit softer ride and is less durable then PA topsheet, as reflected in the price, but still great durability.
Due to low Vicat temperature, this topsheet is not flamed nor sanded, it is ionized, and also can not be sublimated.
Epoxy Side: Inside of the roll, unless it has protective film, please check.
Protective foil should not be removed until your product is complete!
Corona treated on the epoxy side (this looks like a very smooth glossy side).
PS: Please before using check if your topsheet has protective film on the outside. We try as often as we can to get topsheet with protective film but some batches do not have it. In this case you can tape the topside of your topsheet with clear application tape (ebay) or contact paper for protection of needed.
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€9.00 – €14.00 "incl. VAT" -
Polyamide PA / Nylon Topsheet Material – CLEAR (ICP 8210)
€12.00 – €29.00 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pagePolyamide PA / Nylon Topsheet Material – CLEAR (ICP 8210)
Clear Polamide PA / Nylon topsheet material for Skis/Snowboard/Kiteboard etc.
PA nylon topsheet – ICP 8210 is a 2 layer topheet, PA11 and PA12.
ICP 8210 is tough, durable topsheet. It is harder then TPU/ABS and higher quality. Highest quality topsheet on the market. It is partly from recycled material.
Suitable for sublimation / thermal transfer.
Multiple sizes and surface finishes available.
Protective film overview and spec is in the bottom of the page. Please use a scalpel to check what side has the protective foil by lifting it.
Protective foil should not be removed until your product is complete!
PA topsheet gives more stiff ride and is a bit harder to machine, so make sure you have sharp tools.
It comes in flamed or sanded and flamed finish on epoxy side. Outer side can be glossy, matte or with a certain structure (or brushed).
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€12.00 – €29.00 "incl. VAT" -
100% Alcohol Wipe
€0.30 "incl. VAT" Add to cart100% Alcohol Wipe
ON STOCK FROM 22.NOVEMBER 2023
100% Isopropyl Alcohol Wipes for cleaning your sidewalls and tip/tail fill insert material prior flaming for proper bond, or for cleaning your equipment from epoxy.
Wipeing your sidewalls or filler materials with alcohol will greatly improve the bound to the epoxy, and decrease the chance of delamination later on!
price is pr.1 piece.
Read more: https://www.junksupply.com/flaming-and-sanding-sidewalls-or-the-tip-filler-ptex/
€0.30 "incl. VAT" -
PBT Polyester Topsheet material WHITE (ICP 4140/4160)
€13.50 – €15.50 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pagePBT Polyester Topsheet material WHITE (ICP 4140/4160)
ICP 4160/4140 Isosport PBT Polyester Topsheet material WHITE
Coextruded impact modified, durable PBT (polyester) white topsheet for all categories. High quality topsheet for graphics sublimation/heat transfer.
This topsheet is fleece backed for improved bound to epoxy. A fluid epoxy will penetrate the fleece and bind well.
Graphics can be done with sublimation on the outside.
Read more on sublimation here: https://www.junksupply.com/sublimation-heat-transfer-of-graphics-on-plastics/
More durable and hard then TPU topsheet.
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€13.50 – €15.50 "incl. VAT" -
Polyamide PA / Nylon Topsheet material WHITE (ICP 8100)
€20.50 – €23.00 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pagePolyamide PA / Nylon Topsheet material WHITE (ICP 8100)
White Polyamide PA / Nylon Topsheet for skis, snowboard or kiteboard, wakeboard etc.
Isosport ICP 8100 PA / polyamide / Nylon topsheet in white.
It offers all the qualities of ICP 8210 topsheet.
Suitable for sublimation / thermal transfer. Finest colors and durability, se info below.
PA nylon topsheet. Nylon is most tough and durable topsheet. It is harder then PBT topsheet and very scratch resistance, this is reflected in the price.
Back is flamed and impregnated with fleece.
PA topsheet gives more stiff ride and is a bit harder to machine, so make sure you have sharp tools.
Outer side can be glossy, matte or with a certain structure (or brushed).
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€20.50 – €23.00 "incl. VAT" -
PBT Polyester Topsheet Material for Watersport – WHITE (WS100)
€13.00 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pagePBT Polyester Topsheet Material for Watersport – WHITE (WS100)
Coextruded PBT polyester white topsheet for kiteboards. Non impact modified, designed specifically for watersports, kitebaords and wakeboards. High quality topsheet for graphics sublimation/heat transfer.
0.5mm thick , 490mm wide.
This is not impact modified so if you use it for skis/snowboard, it will chip more easy.
This topsheet is fleece backed for improved bound to epoxy. A fluid epoxy will penetrate the fleece and bind well.
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
Graphics can be done with sublimation on the outside.
€13.00 "incl. VAT" -
Wakeboard / Water-Ski Sintered UHMW-PE Grind base 0.6/480mm – CLEAR
€19.50 "incl. VAT" Add to cartWakeboard / Water-Ski Sintered UHMW-PE Grind base 0.6/480mm – CLEAR
New base available from October 4th.
Sintered Wakeboard and Water-Ski UHME-PE grind base / ptex base. Suitable for powsurf as well.
Tougher, more scratch resistant, more durable hence it thinner and lighter clear base.
Great for gliding on obstacles.
It can of course also be used for snow applications, whereby the UHMW PE bases with a molecular weight of 8.7 mil are even better for snow applications.
0.6mm thick, 480mm wide, CLEAR!
Matte on outside and sanded and flamed on epoxy side.
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€19.50 "incl. VAT"
Showing all 8 resultsSorted by popularity