€2.00 "incl. VAT"
NEW thinner tape!
This is a quality magnetic tape for use with our M6 inserts.
You can cut it in small pieces and attache it to the ‘hat’ or top of the inserts. This will help you find your insert during drilling. It is very helfull if your inserts are not visable due to carbon, graphics or similar.
0.5mm thick.
Price is pr. piece 10x620mm
492 in stock
New 0.5mm thick tape 10x620mm long.
This is a quality magnetic tape for use with our M6 inserts.
You can cut it in small pieces and attache it to the ‘hat’ or top of the inserts. This will help you find your insert during drilling. It is very helfull if your inserts are not visable due to carbon, graphics or similar.
0.5mm thick.
Price is pr. piece 10x620mm
| Weight | 0.02 kg |
|---|
VDS rubber Tape for skis and snowboard, with a function to…
…to compensate material
expansions/contractions caused by
temperature alteration
…to dampen or absorb vibrations
…to compensate material tolerances
…to avoid disruptions of the surface material
…to reduce acoustic noise in floor and wall
panels
…to fill up leaks in constructions which
improves the power transmission e.g. at
the ski composite to transmit the power over
the edges
…as backing material for the adhesion
…in composites exposed to a high level of
dynamic stress.
VDS rubber foil is used in between the edges and the laminates, and possibly sidewalls and the laminate. Its purpose is to make sure that the layers stay together even when flexing and under tension.
We offer VDS Rubber ready to use in 13mm, 25mm or 300mm wide. Black or Yellowish
With 300-350mm wide VDS you can cover your full board or ski with VDS.
Ski, Snowboard and Kiteboard,Wakeboard M6 binding Inserts for DIY.
Quality snowboard and kiteboard inserts produced in EU. With cap, to prevent resin going in.
Kiteboard inserts: Nautic stainless steel A4 (AISI 316)
Magnetic tape also available in store!
The insert is M6 x 1 and is 6mm-10.5mm high. If you need it to be magnetic, you can put a magnetic tape on top.
Nautic stainless steel A4 ( AISI 316 ) which does not ever rust.
Splitboard clips, full set.
Integrated type, you need 3.1mm M5 inserts too.
The Union Clips and Hooks are simple and easy to assemble.
These clips are a full set and come with all needed screws and assembly.
