snitered clear uhmwpe ptex base

Sintered Clear ptex base 1.0mm

€15.75 "incl. VAT"

Can be used with 0.9mm step edges!

Tough sintered Clear base, highest quality base for ski and snowboard.

Ptex 2001 Sintered

Suitable for sublimation. Clear.

It is 1.0mm thick, this should fit with 0.9mm edges with no problem.

available width: 310mm.

1m price, for orders of more then 1m, a single piece is supplied

before cutting, lay the base on a flat table for about 48h the base will start to relax. The heating tunnel is just a fast way to bring out the tension.

Storage: Room temperature with low temperature fluctuations. Humidity should not be too high. You can store it on the roll. If you recognize some warping you can also try to wind it in other direction for storage.

108 in stock

Category:

Description

Ptex 2001 Sintered. It is also stabilized for sublimation/graphics transfer. It is Clear.

This is of the highest quality and toughest fast sintered base, UHMW . Ultra hight molecular weight polyethyline.

Width is 310mm and thickness is 1.0mm. Price pr.m.

Base is sanded and flamed on both sides for best binding properties with epoxy

Recommandations from Isosport on sublimation, but this can be experimented with to get best results.

Temp. 135 °C
Heating time 500 Sek.
Cooling time 300 Sek

Some manufacturers call this ptex sintered base for ski and snowboard.

 

 

Additional information

Weight 0.5 kg
Width

145mm, 320mm, 330mm

Related products