€21.50 – €23.50 "incl. VAT"
This is new series IS NHS R3428 race base from Isosport, highest quality all-round race (ptex) base.
IS NHS R3428 1.2/300-330mm
Sintered ski- and snowboard running surfaces made of UHMW polyethylene modified with special fluor and additives for better gliding at a wide range of conditions.
Width is 330mm and thickness is 1.2mm.
price is pr. meter.
Sanded and flamed on both sides.
before cutting, lay the base on a flat table for about 48h the base will start to relax. The heating tunnel is just a fast way to bring out the tension.
Storage: Room temperature with low temperature fluctuations. Humidity should not be too high. You can store it on the roll. If you recognize some wraping you can also try to wind it in other direction for storage.
IS NHS R3428 new race base/ptex from Isosport, highest quality all-round race ptex base.
IS NHS R3428 1.2/300-330mm
sintered ski- and snowboard running surfaces made of UHMW polyethylene modified with special fluor and additives for better gliding at a wide range of conditions.
Width is 330mm and thickness is 1.2mm.
price is pr. meter.
Sanded and flamed on both sides.
some manufacturers call this race ptex base
| Weight | 0.5 kg |
|---|---|
| Type | 1,2/330mm, 1,20/300mm |
Please read this first if used for skis: https://www.junksupply.com/sintered-base-handling-for-skis-and-snowboards/
Ptex, P-tex base or UHMW-PE base for skis and snowboard.
IS CB 7115X sintered base, in black.
100% made of recycled ptex and therefor naturally friendly alternative to other bases!
Top quality base in terms of gliding and durability. With added carbon.
1m price, for orders of more then 1m, a single piece is supplied
Gliding ability is in generally on top level.
Sanded and flamed on both sides.
For more info, see below!
Please read this first if used for skis: https://www.junksupply.com/sintered-base-handling-for-skis-and-snowboards/
IS NHS GRAPHITE sintered base, top quality base in terms of gliding and durability!
IS NHS GRAPHITE 2G2GV Black
Snaded and flamed on both sides.
1m price, for orders of more then 1m, a single piece is supplied
high carbon content and depending on the base special carbon types included. This carbon types and quantity makes the base better to grind in process and less greying over time. Making this base very durable and very long lasting.
Gliding ability is in generally on top level, similar to IS 7500 or better.
Sanded and flamed on both sides.
before cutting, lay the base on a flat table for about 48h the base will start to relax. The heating tunnel is just a fast way to bring out the tension.
Storage: Room temperature with low temperature fluctuations. Humidity should not be too high. You can store it on the roll. If you recognize some wraping you can also try to wind it in other direction for storage.
