€36.00 – €41.00 "incl. VAT"
Splitboard snowboard wood core
A lite and durable wood core made of Paulownia and Poplar mix, vertically laminated interchanging strips of 25mm. 10mm abs strip in the middle.
For simulation use: 400kg/m3 densnity and 6800N/mm Y modulus.
This is how we suggest to do insert area on these cores to avoid any pulling out of inserts, read here.
Choose between several dimensions.
A wood core made of Paulownia and Poplar mix, vertically laminated interchanging strips of 25mm. 10mm abs strip in the middle.
This is how we suggest to do insert area on these cores to avoid any pulling out of inserts, read our How to section!
| Weight | 4 kg |
|---|---|
| Wood type | Paulownia/poplar mix 1700x318x10,5mm, Paulownia/poplar mix 1650x336x8,5mm |
DIY Wakeboard/Kiteboard Paulownia wood core
1520x480x12mm
This is a DIY kiteboards and wakeboards paulownia wood core vertically laminated.
Paulownia is the best woodcore for kiteboards or wakeboards. It offers high durability and very light weight. It is superior to Balsa in every way, also how well it works with epoxy.
Tip: On how to implement and improve insert/binding area durability, please read here.
WARNING: These board are light and fragile if shipped only 1pcs. Due to the fragile nature of these boards during shipping (we protect them well in double cardboard and Fragile marks), we recommend that minimum 2pcs are bought! If you buy 1pcs, you thereby accept responsibility for any transport damage. Boards are always fixable by glue or epoxy. Once the core is covered with composite it will be good as new.
WE CAN NOT SHIP THIS ITEM TOGETHER WITH A SKI/SNB WOOD CORE DUE TO FREIGHT RESTRICTIONS BY THE GLS/DPD.
Ash Ski wood core
Fantastic looks and performance from Ash wood cores made of european Ash wood, with single pieces wood from top to bottom. Ash is great wood for skis and a benefit also is that it is resistant to water, so you can make your skis without using any additional sidewalls.
dimensions: 1900x155x12,5mm
single piece wood planks!
For a Snowboard you need 2 cores, and just join them with the epoxy resin or wood glue.
Density about 700kg/m3, Y modulus about 13000
PS: We do not ship any ski or snowboard wood cores together with kite or wake cores. The size is too big for transport.
Poplar/Beech stringers Snowboard wood core
Great wood core from Slovenia for snowboards. Poplar wood core with Beech stringers end to end thru the insert area.
Poplar wood core with Beech stringers in the insert area (2pcs)
1700 x 320 x 9mm
single piece wood planks!
laminated of 25mm wide strips.
price is pr. piece.
