€0.65 – €70.00 "incl. VAT"
VDS rubber Tape for skis and snowboard, with a function to…
…to compensate material
expansions/contractions caused by
temperature alteration
…to dampen or absorb vibrations
…to compensate material tolerances
…to avoid disruptions of the surface material
…to reduce acoustic noise in floor and wall
panels
…to fill up leaks in constructions which
improves the power transmission e.g. at
the ski composite to transmit the power over
the edges
…as backing material for the adhesion
…in composites exposed to a high level of
dynamic stress.
VDS rubber foil is used in between the edges and the laminates, and possibly sidewalls and the laminate. Its purpose is to make sure that the layers stay together even when flexing and under tension.
We offer VDS Rubber ready to use in 13mm, 25mm or 300mm wide. Black or Yellowish
With 300-350mm wide VDS you can cover your full board or ski with VDS.
VDS rubber for skis , VDS rubber for snowboard.
Quality VDS from Austria.
black VDS rubber treated for bounding with epoxy, ready for use. 0,2mm thick.
13mm, 25mm wide or 300mm wide.
black VDS rubber treated for bounding with epoxy, ready for use. 0,2mm thick.
price is pr.m.
Here is the picture of the Natural color vds.
| Weight | 0.01 kg |
|---|---|
| Quantity type | 23mm wide Natural (yellowish) VDS (pr.meter), 25mm wide (black) (pr.meter), 13mm wide (black) (pr.meter), 70m roll (Natural yellowish) VDS (23mm wide), 70m roll (black) (13mm wide), 70m roll(black) (25mm wide), 300mm wide(black) (pr. 10cm), 350mm wide (black)(pr.10cm), 350mm wide (yellow)(pr.10cm) |
NEW thinner tape!
This is a quality magnetic tape for use with our M6 inserts.
You can cut it in small pieces and attache it to the ‘hat’ or top of the inserts. This will help you find your insert during drilling. It is very helfull if your inserts are not visable due to carbon, graphics or similar.
0.5mm thick.
Price is pr. piece 10x620mm
Suitable for laser printers and photocopiers, these non-woven lets you design and print out your own ratings plates, safety labels and product large designs, easily and economically, without the urgent need to order large print runs.
White
Laminates well
Size: 210 x 297 mm
Thickness: 0.30 mm
Areal weight: 40 g/m²
Quality inserts produced in EU.
Stainless steel insert for splitboard clips.For those who dont wish to drill thru the spitboard, rather embed the inserts in the board during lamination.
The insert is M5 x 1 and is 3.1mm.
It is capped with a see thru cap.
0.8mm threading
Magnetic tape also available in store.
