Shop – Ski and Snowboard Materials
-
Bio based Epoxy resin (6)
-
Carbon Fabric (3)
-
Composite Fabrics for Skis & Snowboards & Kiteboards (15)
-
Extruded HDPE ptex base (9)
-
Glass Fabric (7)
-
Graphite and Race Base (3)
-
Natural fabric (5)
-
Sintered UHMW Ptex Base (20)
-
Ski and Snowboard DIY Kits packages (13)
-
Ski and Snowboard Metal Edges, Inserts, VDS, Titanal and more (13)
-
Skis & Snowboard Base ptex materials (30)
-
Skis & Snowboard Sidewalls and Filler material (9)
-
Skis, Snowboard, Splitboard and Kiteboard Wood core (11)
-
Topsheet material for skis/snowboard or watersports (8)
-
Vacuum Bagging Consumables (5)
[divider]
Showing 1–24 of 94 resultsSorted by popularity
-
M6 Inserts for Snowboard / Kiteboard
€0.65 – €0.75 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pageM6 Inserts for Snowboard / Kiteboard
Ski, Snowboard and Kiteboard,Wakeboard M6 binding Inserts for DIY.
Quality snowboard and kiteboard inserts produced in EU. With cap, to prevent resin going in.
Kiteboard inserts: Nautic stainless steel A4 (AISI 316)
Magnetic tape also available in store!
The insert is M6 x 1 and is 6mm-10.5mm high. If you need it to be magnetic, you can put a magnetic tape on top.
Nautic stainless steel A4 ( AISI 316 ) which does not ever rust.
€0.65 – €0.75 "incl. VAT" -
Steel Metal Edges for Skis / Snowboard
€2.70 – €3.00 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pageSteel Metal Edges for Skis / Snowboard
Skis and snowboard Steel edges. Steel metal edges, ready to be used. Sanded and primed.
For bending the edges we offer Edge bender Pro: https://www.junksupply.com/product/ski-snowboard-edge-bender-pro/
Read this before you apply: http://www.skibuilders.com/phpBB2/viewtopic.php?p=53321&hilit=cold+press#p53321
Choose between 0,9mm, 1.2mm, 1.5mm or 1.8mm step steel edges for base thickness 0,8mm-1.8mm respectively.
Top quality ski or snowboard steel edges from Austria. Sanded and primed, for epoxy use. Please use gloves at all time!
price is pr 1m! When ordering more then 1 m, we will send it in one piece, except on case you order also a wood core with 1.8mm or 1.5mm edges that can not be rolled to the dimensions accepted by GLS or DPD.
€2.70 – €3.00 "incl. VAT" -
VDS Rubber Tape for Skis / Snowboard
€0.65 – €70.00 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pageVDS Rubber Tape for Skis / Snowboard
VDS rubber Tape for skis and snowboard, with a function to…
…to compensate material
expansions/contractions caused by
temperature alteration
…to dampen or absorb vibrations
…to compensate material tolerances
…to avoid disruptions of the surface material
…to reduce acoustic noise in floor and wall
panels
…to fill up leaks in constructions which
improves the power transmission e.g. at
the ski composite to transmit the power over
the edges
…as backing material for the adhesion
…in composites exposed to a high level of
dynamic stress.VDS rubber foil is used in between the edges and the laminates, and possibly sidewalls and the laminate. Its purpose is to make sure that the layers stay together even when flexing and under tension.
We offer VDS Rubber ready to use in 13mm, 25mm or 300mm wide. Black or Yellowish
With 300-350mm wide VDS you can cover your full board or ski with VDS.
€0.65 – €70.00 "incl. VAT" -
Custom product via email
€1.00 "incl. VAT" Add to cart -
ABS Sidewalls (Skis, snowboard, kiteboard)
€7.00 – €7.85 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pageABS Sidewalls (Skis, snowboard, kiteboard)
ABS Sidewalls for Skis, snowboard and kiteboard
Black, white, blue, Fluorescent orange, Fluorescent yellow or Fluorescent green ABS sidewall.
Specially modified ABS types (ID 2300) are used for the thermoplastic materials. These universally usable materials meet the important criteria for sidewalls, such as good bondability and low-temperature impact strength. They also impress with their high temperature stability, which is essential in the press processing of ski construction. Specification is below.
Available colors see ISOSPORT colors ISODUR!
1750x13x10mm
1750x10x8mm
Sanded and flamed on 2 sides, ready for use.
Quantity needed: SNB:2 pcs, Ski pair: 4 pcs, Kite/wake board: 2-3 pcs.
€7.00 – €7.85 "incl. VAT" -
1.2mm Sintered Base ptex BLACK (multiple width)
€9.75 – €19.50 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product page1.2mm Sintered Base ptex BLACK (multiple width)
Please read this first if used for skis: https://www.junksupply.com/sintered-base-handling-for-skis-and-snowboards/
Sintered Base ptex for skis and snowboard
IS 7200-7500 Isosport, sintered quality base.
Width is 125-350mm and thickness is 1.2mm.
For skis, that require minimum warping, use the 140mm wide base.
1m price, for orders of more then 1m, a single piece is supplied
Sanded and flamed on both sides.
For more info, see below!
€9.75 – €19.50 "incl. VAT" -
UD lightweight carbon fabric 130gms
€2.50 – €340.00 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pageUD lightweight carbon fabric 130gms
Uni directional – UD – 0 degrees carbon tape fabric.
weight is 130gms. 50-300mm wide
Carbon Heat Set Woven Unidirectionals are produced with unidirectional carbon fibres in the warp and very lightweight thermoplastic fibres in the weft. The thermoplastic fibres are fused to create a stable fabric that is very stable and easy to handle and cut. These fabrics are excellent for wet lay up and wet preg applications.
pr. 1m length. If more is ordered then it is rolled as one piece.
Fantastic fabric for improving your rides flex/stiffness, giving it extra pop or even making it more light weight.
This fabric can be combined with our Bi-axial carbon fabric to get a triaxial performance fabric.
Tip: Use glue to stick the carbon to the core before layup to make it stay where you desire.
€2.50 – €340.00 "incl. VAT" -
Wakeboard / Powsurf Grind Base PTEX – CLEAR (IS6000)
€13.50 – €16.00 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pageWakeboard / Powsurf Grind Base PTEX – CLEAR (IS6000)
Wakeboard and powsurf grind base / ptex base and topsheet.
See also our new sintered base: https://www.junksupply.com/product/wakeboard-water-ski-grind-base/
IS 6000 base, also called wakeboard grind base, is a base very close to a sintered bases in quality terms.
The thinner version 0.4mm, can be used as a topsheet also.
Ideal for wakeboard grind base or a lite weight ski or snowboard/splitboard or powsurf. 0.9mm step edges fit for the 0.9mm base.
Base can be sanded and flamed on both sides or in some cases sanded and flamed one side and structured the other side. Se below Detailed description for more info!
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€13.50 – €16.00 "incl. VAT" -
TPU / ABS Topsheet Material – CLEAR (ICP 2115)
€9.00 – €14.00 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pageTPU / ABS Topsheet Material – CLEAR (ICP 2115)
TPU / ABS clear topsheet material for skis, snowboard or kiteboard, wakeboard.
Isosport 2115, 2 layer, Clear TPU/ABS topsheet.
Suitable for some solvent ink printers from inside on ABS layer. Please check first.
Gives a bit softer ride and is less durable then PA topsheet, as reflected in the price, but still great durability.
Due to low Vicat temperature, this topsheet is not flamed nor sanded, it is ionized, and also can not be sublimated.
Epoxy Side: Inside of the roll, unless it has protective film, please check.
Protective foil should not be removed until your product is complete!
Corona treated on the epoxy side (this looks like a very smooth glossy side).
PS: Please before using check if your topsheet has protective film on the outside. We try as often as we can to get topsheet with protective film but some batches do not have it. In this case you can tape the topside of your topsheet with clear application tape (ebay) or contact paper for protection of needed.
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€9.00 – €14.00 "incl. VAT" -
Polyamide PA / Nylon Topsheet Material – CLEAR (ICP 8210)
€12.00 – €29.00 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pagePolyamide PA / Nylon Topsheet Material – CLEAR (ICP 8210)
Clear Polamide PA / Nylon topsheet material for Skis/Snowboard/Kiteboard etc.
PA nylon topsheet – ICP 8210 is a 2 layer topheet, PA11 and PA12.
ICP 8210 is tough, durable topsheet. It is harder then TPU/ABS and higher quality. Highest quality topsheet on the market. It is partly from recycled material.
Suitable for sublimation / thermal transfer.
Multiple sizes and surface finishes available.
Protective film overview and spec is in the bottom of the page. Please use a scalpel to check what side has the protective foil by lifting it.
Protective foil should not be removed until your product is complete!
PA topsheet gives more stiff ride and is a bit harder to machine, so make sure you have sharp tools.
It comes in flamed or sanded and flamed finish on epoxy side. Outer side can be glossy, matte or with a certain structure (or brushed).
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€12.00 – €29.00 "incl. VAT" -
100% Alcohol Wipe
€0.30 "incl. VAT" Add to cart100% Alcohol Wipe
ON STOCK FROM 22.NOVEMBER 2023
100% Isopropyl Alcohol Wipes for cleaning your sidewalls and tip/tail fill insert material prior flaming for proper bond, or for cleaning your equipment from epoxy.
Wipeing your sidewalls or filler materials with alcohol will greatly improve the bound to the epoxy, and decrease the chance of delamination later on!
price is pr.1 piece.
Read more: https://www.junksupply.com/flaming-and-sanding-sidewalls-or-the-tip-filler-ptex/
€0.30 "incl. VAT" -
PBT Polyester Topsheet material WHITE (ICP 4140/4160)
€13.50 – €15.50 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pagePBT Polyester Topsheet material WHITE (ICP 4140/4160)
ICP 4160/4140 Isosport PBT Polyester Topsheet material WHITE
Coextruded impact modified, durable PBT (polyester) white topsheet for all categories. High quality topsheet for graphics sublimation/heat transfer.
This topsheet is fleece backed for improved bound to epoxy. A fluid epoxy will penetrate the fleece and bind well.
Graphics can be done with sublimation on the outside.
Read more on sublimation here: https://www.junksupply.com/sublimation-heat-transfer-of-graphics-on-plastics/
More durable and hard then TPU topsheet.
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€13.50 – €15.50 "incl. VAT" -
1.2mm Ptex Sintered Base CLEAR (multiple width)
€9.00 – €19.50 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product page1.2mm Ptex Sintered Base CLEAR (multiple width)
Please read this first if used for skis: https://www.junksupply.com/sintered-base-handling-for-skis-and-snowboards/
Clear sintered ptex base for skis and snowboard. Sintered Base for skis and snowboard UHMW PE base ptex.
Tough sintered highest quality base for ski and snowboard.
IS7500 from Isosport
Suitable for sublimation. Clear.
It is 1.2mm thick, this should fit with 1.2mm edges with no problem.
We also offer 1.0mm thick clear base in our webshop!
available width: 145mm – 350mm.
1m price, for orders of more then 1m, a single piece is supplied
For more info, see below!
€9.00 – €19.50 "incl. VAT" -
Tip/Tail Filler BLACK (pr. 10cm)
€1.60 – €2.85 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pageTip/Tail Filler BLACK (pr. 10cm)
Black ABS tip filler for skis and snowboard.
Modified thermoplastic Isosport ABS insert or filler material for tip or tail.
Sanded and flamed, ready for use.
Price is pr 100mm or 10cm.
If more then one piece is ordered then it is delivered in one piece!
€1.60 – €2.85 "incl. VAT" -
M5 Splitboard Clips Insert 3.1mm – Caped
€0.75 "incl. VAT" Add to cartM5 Splitboard Clips Insert 3.1mm – Caped
Quality inserts produced in EU.
Stainless steel insert for splitboard clips.For those who dont wish to drill thru the spitboard, rather embed the inserts in the board during lamination.
The insert is M5 x 1 and is 3.1mm.
It is capped with a see thru cap.
0.8mm threading
Magnetic tape also available in store.
€0.75 "incl. VAT" -
Titanal T6 0.4mm from AMAG (10cm)
€3.00 "incl. VAT" Add to cartTitanal T6 0.4mm from AMAG (10cm)
Titanal sheet for skis and snowboard.
Titanal T6 from AMAG.
Thickness is 0.4mm, Width is 310mm.
Price is pr 10cm length, you get one piece when you order more.
Se Below for instructions on how to use!
€3.00 "incl. VAT" -
Glass Fabric Triaxial (620gms/22oz/625mm)
€9.00 "incl. VAT" Add to cartGlass Fabric Triaxial (620gms/22oz/625mm)
Updated 23-02-2024!
Triaxial, hi-performance woven glass fabric.
22oz or 620g/m2.
625mm wide.
0/+/-45 degree
thickness: 0.45mm
0 ply: 213g
+/-45 ply: 200g
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€9.00 "incl. VAT" -
1.8mm Sintered Base BLACK (multiple width)
€12.00 – €29.00 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product page1.8mm Sintered Base BLACK (multiple width)
Please read this first if used for skis: https://www.junksupply.com/sintered-base-handling-for-skis-and-snowboards/
Sintered Base for skis and snowboard UHMW PE base ptex.
1.8mm thick!
Sintered thick quality base 100% recycled, similar to IS7200, for a most durable setup. Goes with 1.8mm step edges. thickness is 1.8mm.
For skis, that require minimum warping, use the 145mm wide base directly!
price is pr. meter.
Sanded and flamed on both sides.
For more info, see below!
€12.00 – €29.00 "incl. VAT" -
2.0/200mm ABS Filler WHITE (pr. 10cm)
€1.50 "incl. VAT" Add to cart2.0/200mm ABS Filler WHITE (pr. 10cm)
White tip filler.
Modified thermoplastic Isosport ABS insert or filler material for tip or tail.
200mm wide, 2.0mm thick.
Sanded and flamed, ready for use.
Price is pr 100mm or 10cm.
If more then one piece is ordered then it is delivered in one piece!
€1.50 "incl. VAT" -
Extruded ptex base BLACK 1.0-1.2mm (IS 4400 or similar)
€10.50 – €12.00 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pageExtruded ptex base BLACK 1.0-1.2mm (IS 4400 or similar)
Extruded black ptex base for skis and snowboards.
Isosport 4400, highest quality extruded ptex base for ski and snowbaord.
Extruded base in Black color.
1.2mm thick or 1.0mm thick
330mm wide
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
sanded and flamed both sides ( to give the best adhesion with epoxy).
€10.50 – €12.00 "incl. VAT" -
Bcomp flax fabric (+/-45 Bi-axial)
€25.00 – €50.00 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pageBcomp flax fabric (+/-45 Bi-axial)
Natural flax from Bcomp.
This material is 100% natural and excellent for all products. The stiffness is higher then glass fabric, but lower then carbon. Please see datasheet and try simulator to get an idea.
+/-45 degree layers in total 350g (175g each).
thickness 0.5mm
select width 640mm or 1280mm.
pr. 1m length. If more is ordered then it is rolled as one piece.
Another great property is that the material works well as a dampener. This means you can use the Biaxial and UD flax together or you can combine them with glass or carbon.
For sumulation use:
Density: 1350
Y modulus: 58500
Please see datasheet for more: t-flachs-5008-e
Instructions: The flax fiber absorbs more resin.
Pneumatic presses with ~5 bar is recommended to make good laminate with minimum excess resin.
Vacuum press: follow this resin quantity recommendations: resin / (resin + fabric) = 60%
Spread the resin well with a roll on a flat surface or pour the epoxy on to the fabric and then make a roll out of it. Then let it soak for some minutes. Much easier than try to smear it out.Tip: Use masking tape when cutting it for better result!
€25.00 – €50.00 "incl. VAT" -
Bcomp ‘AmpliTex Fusion’ – Unidirectional
€3.50 – €21.00 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pageBcomp ‘AmpliTex Fusion’ – Unidirectional
Flax and carbon mix fabric, best of both worlds.
ampliTex flax-carbon UD fabrics, non-crimp, in multiple widths and weights.
170-225gms, 25-350mm wide.
price is pr. 1m length. If more is ordered then it is rolled as one piece.
Technical datasheet: t-flachs-5027-e
Flax parameters: Density: 1350, Y modulus: 58500
Carbon parameters: Density: 1700 Y modulus: 235000
See guide on how to find averaged parameters for simulation
€3.50 – €21.00 "incl. VAT" -
Glass Fabric Tri-axial (662gms/23oz, 300mm wide)
€4.00 "incl. VAT" Add to cartGlass Fabric Tri-axial (662gms/23oz, 300mm wide)
Ski, snowboard Triaxial glass fabric.
662gms Triaxial, hi-performance woven glass fabric.
23oz or 662g/m2
300mm wide
thickness 0.65mm
0/+/-45 degree
0 ply: 319g
+/-45 ply: 148g
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€4.00 "incl. VAT" -
Bcomp flax fabric – Unidirectional (300gms, 350mm wide)
€15.00 "incl. VAT" Add to cartBcomp flax fabric – Unidirectional (300gms, 350mm wide)
Natural flax from Bcomp.
UD directional 300gms, 350mm wide. Thickness 0.3mm
Technical datasheet: t-flachs-5009-e
This material is 100% natural and excellent for all products. The stiffness is higher then glass fabric, but lower then carbon. Please see datasheet and try simulator to get an idea.
pr. 1m length. If more is ordered then it is rolled as one piece.
For simulation use:
Density: 1350
Y modulus: 58500
Please see datasheet for more:
http://bcomp.ch/files/e_tds_ud_5009_5025.pdf
Another great property is that the material works well as a dampener. This means you can use the Biaxial and UD flax together or you can combine them with glass or carbon.
Note: This fabric will take more epoxy then glass or carbon fabric.
Instructions: The flax fiber absorbs more resin.
Pneumatic presses with ~5 bar is recommended to make good laminate with minimum excess resin.
Vacuum press: follow this resin quantity recommendations: resin / (resin + fabric) = 60%
Spread the resin well with a roll on a flat surface or pour the epoxy on to the fabric and then make a roll out of it. Then let it soak for some minutes. Much easier than try to smear it out.Tip: Use masking tape when cutting it for better result!
€15.00 "incl. VAT"
Showing 1–24 of 94 resultsSorted by popularity